Issue link: http://palletcentral.uberflip.com/i/919038
35 HOT WORKS PROGRAM NWPCA Fire Code Compliance Manual for Outdoor Storage of Wood Pallets | Version 1.0 (December 2017) Fire Safety Precautions Since a Plant Manager authorizes Hot Work only when specific fire safety precautions are taken, these precautions should be built into the permit system. A. ___-ft. rule. The area surrounding the work should be cleared entirely of fire hazards. B. Floors should be swept clean. Grease and oils should be cleaned up and removed, not simply soaked up with oil dry. Floors of combustible material (e.g. plank on steel, wood block) are covered with fire-resistant or noncombustible material. C. Flammable liquids like paints, oils, and lacquers are removed from the area, not just sealed. D. Combustibles that cannot be moved are protected with fire-resistant material or metal shields. This includes storage or machinery with grease or lint deposits. E. Explosive atmospheres are eliminated or Hot Work is not permitted. Processes that produce explosive atmospheres are halted and the area is monitored for accumulation of combustible gasses continuously before, during, and after Hot Work. F. All wall and floor openings are covered. Floor openings are plugged with noncombustible caulk. Ductwork and duct openings are sealed with metal covers built for the vent, or covered with fire-resistant material. G. All doors and fire doors are closed to prevent sparks from escaping. H. Automatic sprinkler protection must be in service and fully operational. I. Hot Work equipment is in good repair. Damaged or leaking hoses or hose attachments are of particular concern on torch cutting and welding equipment. Disciplinary Action Any employee not following this procedure, or deviating from it without approval from management, will be subject to disciplinary action as deemed necessary by Plant Management.