Issue link: http://palletcentral.uberflip.com/i/919038
37 HOT WORKS PROGRAM NWPCA Fire Code Compliance Manual for Outdoor Storage of Wood Pallets | Version 1.0 (December 2017) Completed by Plant Manager, who is the Permit Authorizing Individual (PAI). PAI must inspect the work area prior to approving Hot Work, inspect at least once each day while the hot work permit is performed to ensure that it is a fire safe area, and make a final check. The PAI should personally see that the following fire precautions are in place. Cutting and welding equipment in good repair........................................…….. Yes Fire extinguishers readily available at the work site....................................... Yes Water hose or 5-gallon pail(s) of water are readily accessible at the work site.............................................................................................. Yes Sprinklers are in service.................................................................................... Yes N/A Floor has been swept clear of combustibles within ___ feet of Hot Work…... Yes Combustible floors and materials within ____ feet of Hot Work are wet down or otherwise protected………………………………………….….. Yes N/A All combustible or flammable liquids within ____ feet removed……………..….… Yes N/A Combustibles and hydraulic lines are protected with covers, guards, welding blankets, welding pads or metal shields…......................................... Yes N/A All wall and floor openings, including conveyor openings, within __ feet of operations are covered with noncombustible material….…. Yes N/A Pads or protection beneath work to collect sparks.......................................... Yes N/A Partitions, walls, ceilings or roof in proximity of hot work verified as not containing combustible covering, exposed foam, sandwiched foam or combustibles…………………………………….... Yes N/A Combustibles moved away from opposite side of wall on which Hot Work is performed.................................................................... Yes N/A Enclosed tanks, ducts, dust collectors, other containers subject to Hot Work have been cleaned of all combustibles...................................... Yes N/A Containers purged of all flammable or combustible vapors per NFPA 326 and tested................................................................... Yes N/A Confined Space Permit program also implemented..................................... Yes N/A Fire watch will be provided during Hot Work and for 2 hours thereafter….. Yes N/A Fire watch trained in the use of extinguishing equipment, fire alarm system, and procedures for notifying emergency respons......... Yes THE LOCATION CITED HAS BEEN INSPECTED, THE NECESSARY PRECAUTIONS TAKEN AND PERMISSION IS GRANTED FOR THIS WORK. (PAI responsible for cutting and welding authorization) Signed: _________________________________________________ Time:___________ *Post a copy of this Permit at the start of Hot Work, for the entire duration of the work. Bright color copy paper is recommended, to make the site evident.